Clonare fresco Windows 7 -fsed HDD a Linux Server perché non dispone di HDD esterni o dischi per il backup

Nuovo computer porttile lenovo x220 con Windows 7 Pro con le seguenti specifiche. Voglio eseguire il backup del disco al mio server, ma devo conoscere il W7 fs, che cosa è?

$ sudo mount -t ntfs /dev/sdb Windows/ NTFS signature is missing. Failed to mount '/dev/sdb': Invalid argument The device '/dev/sdb' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (eg /dev/sda, not /dev/sda1)? Or the other way around? $ sudo mount -t ntf /dev/sdb Windows/ mount: unknown filesystem type 'ntf' $ sudo mount -t nts /dev/sdb Windows/ mount: unknown filesystem type 'nts' $ dmesg|tail [ 25.928832] sdb: p2 size 4779917312 extends beyond EOD, truncated [ 25.928867] sdb: p3 start 4804509696 is beyond EOD, truncated [ 25.929882] sd 6:0:0:0: [sdb] 78142806 4096-byte logical blocks: (320 GB/298 GiB) [ 25.931382] sd 6:0:0:0: [sdb] No Caching mode page present [ 25.931387] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 25.931392] sd 6:0:0:0: [sdb] Attached SCSI disk [ 27.960028] wlan0: no IPv6 routers present [ 174.655199] EXT3-fs (sdb): error: can't find ext3 filesystem on dev sdb. [ 174.657319] EXT2-fs (sdb): error: can't find an ext2 filesystem on dev sdb. [ 174.660818] EXT4-fs (sdb): VFS: Can't find ext4 filesystem 

Forse legato

  1. https://unix.stackexchange.com/questions/11028/backup-whole-hard-disk-linux

  2. Adattatore USB-SATA -gestione per colbind il nuovo HDD al mio porttile * ix, https://superuser.com/a/387134/114739

  3. Sto usando questi adattatori da 2,5 "adattatori da SATA a HDD qui e qui , comprati due pezzi, ma entrambi sembrano funzionare alless con l'utilizzo di automounting con Ubuntu e Windows.

A commento di Luke

 $ sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000da58e Device Boot Start End Blocks Id System /dev/sda1 * 2048 113055743 56526848 83 Linux /dev/sda2 113057790 117229567 2085889 5 Extended /dev/sda5 113057792 117229567 2085888 82 Linux swap / Solaris Note: sector size is 4096 (not 512) Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 4864 cylinders, total 78142806 sectors Units = sectors of 1 * 4096 = 4096 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x181d6d22 Device Boot Start End Blocks Id System /dev/sdb1 * 2048 3074047 12288000 7 HPFS/NTFS/exFAT /dev/sdb2 3074048 600563711 2389958656 7 HPFS/NTFS/exFAT /dev/sdb3 600563712 625139711 98304000 7 HPFS/NTFS/exFAT 

Err al commento di Lamar

 [email protected]:/# mount -t ntfs /dev/sdb2 /Windows/ NTFS signature is missing. Failed to mount '/dev/sdb2': Invalid argument The device '/dev/sdb2' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (eg /dev/sda, not /dev/sda1)? Or the other way around? [email protected]:/# sudo mount -t ntfs /dev/sdb2 /Windows/ NTFS signature is missing. Failed to mount '/dev/sdb2': Invalid argument The device '/dev/sdb2' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (eg /dev/sda, not /dev/sda1)? Or the other way around? $ sudo mount -t ntfs /dev/sdb2 /Windows NTFS signature is missing. Failed to mount '/dev/sdb2': Invalid argument The device '/dev/sdb2' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (eg /dev/sda, not /dev/sda1)? Or the other way around? 

È ansible clonare l'integer disco su un file di image con dd , puoi anche comprimerlo per risparmiare spazio:

 sudo dd if=/dev/sdb2 | bzip2 >~/old-disk.img.bz2 

Se hai pv , puoi anche get una barra di avanzamento:

 sudo pv /dev/sdb2 | bzip2 >~/old-disk.img.bz2 

Si desidera utilizzare NTFS-3G , nota 3G .

Questo dovrebbe fare il trucco:

$ mount -t ntfs-3g /dev/sdb2 /mnt/point

Lo uso regolarmente per montare il disco rigido esterno con un disco rigido virtuale Server 2008 R2 su Debian Squeeze.

Il command mount dovrebbe avere / host e / Windows come questo / host / Windows /. Provalo.